News

Bath room cleaning and maintenance skills and maintenance precautions

Update:2021-04-19
Abst: 1. Cleaning and maintenance of shower room 1. When cleaning the four walls and chassis of the shower room, please use a soft dry cloth. If there is f...
1. Cleaning and maintenance of shower room
1. When cleaning the four walls and chassis of the shower room, please use a soft dry cloth. If there is fine dirt, please use a soft cloth or sponge neutral detergent to clean it. When removing stubborn stains, please use alcohol to remove.
2. When using the special detergent for bathhouse, please use it correctly according to the precautions on the container. The wrong way to use it will have bad effects on people, and simply make the product show some bad conditions.
3. Do not use the following items for cleaning: acidic, alkaline solvents, chemicals (such as hydrochloric acid), propionic acid diluents and other solvents, decontamination powder, etc., otherwise it will have adverse effects on the human body and cause the product to show some undesirable conditions .
How to use and maintain the pulley in the shower room
1. Push-pull shower room, now there are two methods such as sliding block and sliding wheel.
2. Problems that should be paid attention to in the use of pulleys and sliders.
(1) Prevent the sliding door from being reinstalled forcefully below to avoid falling of the sliding door;
(2) Pay attention to regular cleaning of pulleys and sliding blocks, and add lubricant (lubricant or slip wax;
(3) Adjust the adjusting screw of the slider regularly to ensure the effective load and good sliding of the slider on the movable door.
Maintenance of tempered glass
1. Do not hit or hit the glass surface with sharp objects to avoid damage.
2. Do not use corrosive liquids to scrub the surface of the glass to avoid damage to the surface gloss.
3. Do not use rough materials to scrub the surface of the glass to avoid scratches.
Aluminum alloy frame maintenance
1. Electrostatic powder spray products (such as white, patina, yellow, red, purple and other solid spray products) are mainly to prevent direct sunlight and exposure, because the resin material and color base powder will have a photosensitive response, and the spray layer will fade; secondly Do not scrub with corrosive liquids or materials; third, do not scrub the appearance with rough materials (including toothpaste). Fourth, do not use sharp objects to describe the appearance, such as stains on aluminum, please use a neutral detergent to dissolve the water scrub.
2. Oxidation and coloring products (gold, silver, matte silver, wire drawing, etc.); these products are not easy to fade compared to electrostatic spraying products, but their hardness is poor, and they cannot be described with sharp objects. . If the surface of the aluminum is stained, please use a neutral detergent to dissolve it in water and scrub it.