1. Wash basin cleaning method: Prepare cleaning tools s […]
1. Wash basin cleaning method:
Prepare cleaning tools such as rags, detergents, and small brushes first. Since the plug ring of the drain on the surface of the basin is the easiest place to hide garbage, if there is garbage, use a clip to catch the garbage first; then clean the surface of the wash basin, wrung out with a rag and detergent, and wipe it carefully; The plug ring can not be wiped with a rag. At this time, a small brush and detergent can be used. After cleaning, please use a dry cloth to wipe clean water stains on the surface.
2. Precautions for basin cleaning and maintenance:
The cleaning and maintenance of ceramic basins is relatively simple. Just use a rag to moisten it and add a detergent to clean it. Be careful not to wipe it with a strong friction cloth. Daily dust, sand, etc. should be removed in time to prevent abrasion of the surface. When scratches appear on the surface of the ceramic basin, apply a little toothpaste on the scratches, wipe them repeatedly with a soft cloth, and then wax.
1. Cleaning method of toilet:
Clean toilet spirit cleaning method: This is one of our most commonly used methods, but is your method or order correct? The correct method is to first wet the toilet with water, then spread a layer of toilet paper, and evenly apply the toilet cleaner on the edge of the toilet. Make sure that it is all smeared, and then wait for 10 minutes, then carefully clean it with a brush. , Rinse with clean water several times, try to rinse four or five times, so that it is clean.
Baking soda cleaning method: First, we need to pour the baking soda into the toilet without too much, and then use boiling water for half an hour, the dirt can be easily removed. For cleaning other things in daily life, you can also use baking soda to clean. But to avoid stubborn yellow stains in the toilet. You need to sprinkle the baking soda in the toilet, then leave it quietly for 10 minutes, and finally use the toilet brush to clean it.
Vinegar cleaning method: first mix the vinegar and water, then pour it into the toilet. This needs to be soaked for about half a day, which is suitable for work parties who want to go out to work because they do not need to use the toilet. After half a day, some hard-to-clean deposits can be removed with one brush. After cleaning the toilet, evenly sprinkle the white vinegar on the inside of the toilet. Keep it for a few hours to protect it from flushing. After a few hours, flush it off with water. In this way, it can be disinfected, deodorized, and sterilized.
1. Bathtub cleaning method:
Bathtub cleaning: The general stains of the bathtub can be cleaned with a discarded soft toothbrush dipped in bleaching powder and water, and if it is difficult to wipe, you can use half a lemon dipped in salt to wipe it, or use a soft toothbrush with whitening function Toothpaste scrub, turpentine is also very useful at this time.
Cast iron bathtub cleaning: The cast iron bathtub can be cleaned with acid-free cleaners. Use non-abrasive soft sponge pads to clean the non-slip surface of the bathtub that is difficult to remove dirt.
1. Shower cleaning method:
Manual cleaning: Remove the net cover or other parts that absorb scale from the shower head in the bathroom, clean it with a brush, and put it back in place.
Hand-wiping cleaning: The water outlet of this type of bathroom shower is designed with rubber granules. The rubber material is soft and comfortable, and it is not easy to scale. It is easy to clean. Just use your fingers to gently rub the rubber granules to easily crush the scale ,pop up.
1. Cleaning method of faucet:
Use a soft cloth to apply toothpaste to clean the surface, and then clean the surface with clean water. Do not use alkaline cleaners or use scouring pads or steel balls to try to avoid damage to the plating surface.
During use, the single-handle faucet should be opened and closed slowly, and the double-handle faucet should not be closed too tightly.
The water outlet usually has a foaming device (also called a foaming device, different faucets, and foaming devices). Because of water quality problems, the water volume of the faucet is often small after a period of use, which may be due to foaming The device is blocked by debris, you can unscrew the foamer and use water or a needle to clear the debris.