1. The glass film mainly adopts the dry pasting method, and the glass film can be used immediately after the film is applied, with fast time and high efficiency. (If there is a special film or curved glass, according to the type of product, humidity, temperature, blurred vision will gradually decrease over time, and will be completely eliminated within two to six weeks, and small water spots will be reduced until eventually disappear) .
2. It is recommended not to clean or wipe the glass within two days after the glass product is installed. During this period, the change in appearance is a natural part of the explosion-proof film bonding process.
3. The anti-scratch coating on the surface of the glass explosion-proof film, after proper maintenance, the glass film will be as bright as ever after many years. In order to achieve the best results, it is recommended to use a soft and clean cotton cloth and ordinary household high-efficiency glass cleaner or weak acid detergent to clean.
4. In the process of transportation or packaging, the laminated glass products should be completely separated by soft packaging materials to avoid accidental damage.
5. Operating temperature: use in an environment between -30°C and +80°C.
6. The corners should not be torn by hand intentionally.
7. It is strictly forbidden to use scrubbing agents (powder or liquid) with abrasive powder.
8. It is strictly forbidden to use strong acid cleaning fluid (such as sulfuric acid, hydrofluoric acid and other strong acid liquids).
9. It is strictly forbidden to use steel wool to wipe or similar metal or plastic wipes.
10. It is strictly forbidden to use razors, scrapers or blades to wipe or scratch.
11. It is strictly forbidden to wipe with rough paper towels, emery cloth and sandpaper.